Draft:X-Cart:X-Showroom

From X-Cart 4 Classic
Revision as of 19:26, 30 January 2015 by Dohtur (talk | contribs)
Jump to: navigation, search

Overview

Getting started

  1. Install the X-Showroom module:
  2. Make sure the installed module is active:
  3. Check and adjust the module configuration settings:

Installing the module

Uninstalling the module

Activating the module

If the module X-Showroom is installed, but not active, you can enable (activate) it.

To enable the module:

  1. Go to the Modules section of your store's Admin area (Settings -> Modules).
  2. In the list of your store's installed modules, locate the entry for X-Showroom.
  3. Select the check box on the left of the module name.
    The module will be enabled.

Deactivating the module

It is possible to temporarily disable (deactivate) the installed X-Showroom module. Deactivation stops the module from operation, but it does not remove any settings you made to the module configuration nor clear any data that was generated during the period that the module was in operation. If you wish to completely remove all the data related to using the module, you need to uninstall it. See Uninstalling the module for more info.

To disable the module:

  1. Go to the Modules section of your store's Admin area (Settings -> Modules).
  2. In the list of your store's installed modules, locate the entry for X-Showroom.
  3. Unselect the check box on the left of the module name.
    The module will be disabled.


Configuring the module

After installation and activation, the X-Showroom module runs with the default parameters specified in its configuration settings. If you wish, you can adjust these parameters to better suit your needs; however, it is recommended to avoid using values that are too large or too small, as it may negatively affect the usability of the user interface for the store administrator.

To adjust the module configuration:

  1. Go to the Modules section of your store's Admin area (Settings -> Modules).
  2. In the list of your store's installed modules, locate the entry for X-Showroom and click the Configure button next to it. (The Configure button is displayed only when the module is active).
    The X-Showroom module configuration settings page opens:
    Showroom module settings.png

  3. Adjust the module settings as you require. Detailed information regarding the X-Showroom module configuration settings is available below.
  4. Click the Apply changes button to save the changes.

The configuration settings for the X-Showroom module are as follows:

  • Max thumbnail width in admin area and Max thumbnail height in admin area: These are the maximum pixel dimensions of a banner image thumbnail as displayed in the general list of uploaded banner images on the Showroom page (Content ->Showroom) in your store's Admin area:
    Max thumbnail dimensions.png
    The default value for both these settings is 300 px.

  • Max photo width in admin area and Max photo height in admin area: These are the maximum pixel dimensions of a banner image displayed on the Edit Photo page in the Admin area where you tag the banner image with links to specific products:
    Max photo dimensions.png
    The default value for both these settings is 820 px.